|
PADDLEWHEEL
FLOW SENSOR |
Model:SL
|
|
|
|
Accuracy±0.75%
of full scale |
|
Measuring
pipe size range DN 15 to DN 600(0.5 to 24
inch) |
|
Measuring
flow rate range 0.15 to 8 M/s(0.5 to 26 Ft/s) |
|
Field-rangable
supply voltage from DC 5 to 24 VS |
|
Field-rangable
operting temperature from -20 to 90°C(-4
to 194°F) |
|
Protection
class NEMA4(IP65) or NEMA6,6P(IP68) |
|
CE
EMC certification |
|
|
|
-------------------------------------------------------------------------- |
|
|
PADDLEWHEEL
FLOW CONTROLLER METER |
Model:SL2
|
|
|
|
Auto.
change red or green display when alarm status
changes |
|
Accuracy±0.75%
of full scale |
|
Measuring
pipe size range DN 15 to DN 600(0.5 to 24
inch.) |
|
Measuring
flow velocity range 0.1 to 8 M/s(0.33 to 26
Ft/s)
|
|
Field-rangable
supply voltage from DC 14 to 28 V |
|
Display
flow units Liter,GAL,M3,TON can be modified |
|
Dual
alarm function (optional) |
|
16
bit DAC analog output function (optional) |
|
Digit
RS-485 interface function (optional) |
|
Protection
class NEMA4/IP65 |
|
|
|
-------------------------------------------------------------------------- |
|
Model:SLTF/SLCS/SLPG/SLC
|
|
|
|
SLTF |
[CPVC TEE FITTING (SCH80)] |
|
SLCS |
[CPVC+PP
CLAMP SADDLES (SCH80)] |
|
SLPG |
[
CPVC GLUE-ON ADAPTERS] |
|
SLC |
[CPVC
SOLVENT CEMENT] |
|
|
|
-------------------------------------------------------------------------- |
|
|
DIGITAL
PRESSURE CONTROLLER METER 2.5" |
Model:SPD3
|
|
|
|
Auto.
change red or green display when alarm status
changes |
|
Accuracy0.25%
F.S. |
|
Thick
film strain gage on ceramic and stainless
steel(SUS316) |
|
Display
pressure units bar,Kg/cm2,KPa,MPa,PSI,mmHg,inHg
can be modified |
|
Dual
alarm function (optional) |
|
16
bit DAC analog output function (optional) |
|
Digit
RS-485 interface function (optional) |
|
Protection
class NEMA4/IP65 |
|
|
|
|
|
|
|
-------------------------------------------------------------------------- |
|
DIGITAL
PRESSURE TRANSMITTER 2.5"
|
Model:SPD2
|
|
|
|
Accuracy
0.25% F.S. |
|
Thick
film strain gage on ceramic and stainless
steel(SUS316) |
|
Pressure
range from -1 to 250 bar |
|
Display
pressure units bar, Kg/cm2,KPa,MPa,PSI,mmHg,inHg
can be modified
|
|
Memory
hold maximun value and minimun value function |
|
Field-rangable
supper voltage from 10 to 28 Vdc |
|
RL(max.)<[(Vs-8V)/0.02A]£[,up
to 800 ohms at 24Vdc |
|
Protection
class NEMA4/IP65 |
|
CE
EMC certification |
|
----------------------------------------------------------------------- |
|
|
|
PRESSURE TRANSMITTER |
Model:SPL |
|
|
|
Accuracy ±0.5%, F.S. |
|
Field-temperature
compensation function(-25~+85°C) |
|
Thick
film strain gage on ceramic and stainless
steel(SUS316) |
|
Pressure
range from -1 to 250 bar |
|
Response
time <5ms |
|
Output
DC4~20mA RL(max.)<[(Vs-10V)/0.02A]Ω |
|
Protection
class NEMA4/IP68 |
|
|
|
----------------------------------------------------------------------- |
|
PRESSURE
TRANSMITTER (Auto-tracing compensation zero-area
function) |
Model:SP
|
|
|
|
|
Accuracy
0.25%,0.5%, F.S. |
|
Auto-tracing
compensation for zero-area pressure(<0.15%F.S.) |
|
Field-temperature
compensation function(-25~+85°C) |
|
Thick
film strain gage on ceramic and stainless
steel(SUS316)
|
|
Pressure
range from -1 to 250 bar |
|
Response
time <5ms |
|
Output
DC4~20mA RL(max.)<[(Vs-10V)/0.02A]Ω |
|
Protection
class NEMA4/IP65 |
|
CE
EMC certification |
|
|
|
|
----------------------------------------------------------------------- |
|
|
PRECISION
AC CURRENT SENSOR |
Model:CTA |
|
|
|
Accuracy
0.2%F.S. |
|
Use
permalley core material has highter magnetic
flux density,transformers frequency range
from 20Hz to 100KHz)
|
|
Dielectric
strength 2KVac/1min. (input/output) |
|
Impuse
test 5KV(1.2x50us)(IEC255-4,ANSIC37.90a/1974) |
|
Surge
test (ring wave)2.5KV(0.25ms/1MHz)(IEC255-4) |
|
Low
cost and dimension small and High stability |
|
CE
EMC certification |
|
|
|
-------------------------------------------------------------------------- |
|
|
CLAMP-ON
TYPE PRECISION AC CURRENT SENSOR |
Model:CTB |
|
|
|
Accuracy
0.2%F.S. |
|
Clamp-on
type CT, connector easy |
|
Use
permalley core material has highter magnetic
flux density,transformers frequency range
from 20Hz to 400Hz
|
|
Dielectric
strength 2KVac/1min. (input/output) |
|
Impuse
test 5KV(1.2x50us)(IEC255-4,ANSI C37.90a/1974) |
|
Surge
test (ring wave)2.5KV(0.25ms/1MHz)(IEC255-4) |
|
Low
cost and dimension small and High stability |
|
CE
EMC certification |
|
|
|
-------------------------------------------------------------------------- |
|
|
LVDT-DISPLACEMENT
TRANSDUCER SENSOR |
Model:SLVDT
|
|
|
|
Accuracy
0.25%F.S. |
|
Measurement
rangs 0~2.5mm to 0~50mm |
|
Wide
operating condition(-30¢J
to 80¢J) |
|
Stainless
steel(SUS316) constrnction |
|
Low
cost and High stability |
|
CE
EMC certification |
|
|
|
-------------------------------------------------------------------------- |
|
|
|
|
HEAD-MOUNTED
TWO-WIRE POTENTIONMETER TRANSMITTER
|
Model:TWP
|
|
|
|
Accuracy 0.1%F.S. |
|
Wide input ranges from 100Ω to 50KΩ(3-wire) |
|
Burnout protection function, upscale the outpu
current limit of approximately≦20.32mA |
|
Field-rangeable supply voltage from 10 to
30V |
|
RL(max.)=(Vsupply-9V)/20mA,up to 750Ω
at 24VDC Low cost and high stability |
|
CE
EMC certification |
|
|
|
-------------------------------------------------------------------------- |
|
|
HEAD-MOUNTED
TWO-WIRE TEMPERATURE TRANSMITTER |
Model:TW
|
|
|
|
Accuracy 0.1%F.S.(Pt-100),0.2%F.S.±0.5°C(CJC)(TC) |
|
Input range(-1999~9999)Display unit(°C,°F)canbemodify |
|
Burnout protection function, upscale the outpu
current limit of approximately≦20.32mA |
|
Field-rangeable supply voltage from 10 to
30V |
|
RL(max.)=(Vsupply-9V)/20mA,up to 750Ω
at 24VDC Low cost and high stability |
|
CE
EMC certification |
|
|
|