|
|
|
PROGRAMMABLE
DC & AC SIGNAL ISOLATED TRANSMITTER |
Model:TDP |
|
|
|
Accuracy
0.1%F.S. |
|
Field-rangeable
switchable DC/AC input ranges from 10mV to
600V/200uA to 5A,wide switchable DC output
ranges over 20 standard process signal |
|
Dielectric
strength 2KVac/1 min.(input/output/power) |
|
Wide
input range for auxiliary power |
|
Dimension
small & High stability |
|
CE
EMC certification |
|
|
|
--------------------------------------------------------------------------------- |
|
|
|
PROGRAMMABLE
POTENTIOMETER ISOLATED TRANSMITTER |
Model:TKP |
|
|
|
Accuracy
0.1%F.S. |
|
Field-rangeable
switchable potentiometer input ranges from
100ohm to 100Kohm,wide switchable DC output
ranges over 20 standard process signal |
|
Dielectric
strength 2KVac/1 min.(input/output/power) |
|
Wide
input range for auxiliary power |
|
Dimension
small & High stability |
|
CE
EMC certification |
|
|
|
--------------------------------------------------------------------------------- |
|
|
|
PROGRAMMABLE
LOAD-CELL ISOLATED TRANSMITTER |
Model:TLP |
|
|
|
Accuracy
0.1%F.S. |
|
Field-rangeable
switchable load-cell input ranges from 3mV
to 90mV,wide switchable DC output ranges over
20 standard process signal |
|
Dielectric
strength 2KVac/1 min.(input/output/power) |
|
Wide
input range for auxiliary power |
|
Dimension
small & High stability |
|
CE
EMC certification |
|
|
|
--------------------------------------------------------------------------------- |
|
|
|
PROGRAMMABLE
RTD(Pt-100) ISOLATED TRANSMITTER |
Model:TPP |
|
|
|
Accuracy
0.1%F.S. |
|
Field-rangeable
switchable Pt-100 input ranges from 0~50¢J
to -200~800¢J,wide switchable DC output
ranges over 20 standard process signal |
|
3
wire configuration automatically compensate
line resistance effects |
|
Dielectric
strength 2KVac/1 min.(input/output/power) |
|
Wide
input range for auxiliary power |
|
Dimension
small & High stability |
|
CE
EMC certification |
|
|
|
--------------------------------------------------------------------------------- |
|
PROGRAMMABLE PULSE SCALER ISOLATED
TRANSMITTER |
Model:
TFP |
|
|
Maximum input frequency 10KHz |
|
A
variety of input and output selection |
|
Wide range of pulse input premultiplied (0.1 to
1.0) and the pre-addition (1-165000) Function |
|
Dielectric strength 2KVac/1 min.(input/output/power |
|
Wide input
range for auxiliary power |
|
Dimension
small & High stability |
|
|
|
----------------------------------------------------------------------- |
|
PROGRAMMABLE DC TO FREQUENCY ISOLATED TRANSMITTER |
Model:
TDF |
|
|
Accuracy 0.1%F.S. |
|
Maximum output frequency 100KHz |
|
Wide range of pulse output functions
0.006Hz to
100KHz
|
|
Wide range of pulse input premultiplied
(0.1 to
1.0) and the pre-addition
(1-165000) Function
|
|
Dielectric strength 2KVac/1 min.(input/output/power |
|
Wide input
range for auxiliary power |
|
Dimension
small & High stability |
|
|
|
----------------------------------------------------------------------- |
|
|
AC
CURRENT TRANSMITTER (mini-size) |
Model:TWA
|
|
|
|
Accuracy ±0.025%F.S. |
|
Field-rangeable supper voltage from 10 to
28V |
|
Dimension mini-size(51.5x22.2x19.3mm) |
|
Low cost and high stability |
|
CE
EMC certification |
|
|
|
-------------------------------------------------------------------------- |
|
|
LOAD-CELL
TRANSMITTER (mini-size) |
Model:TWL
|
|
|
|
Accuracy ±0.025%F.S. |
|
Wide selection of input range/output response
time |
|
Field-rangeable supper voltage from 10 to
28V |
|
Dimension mini-size(51.5x22.2x19.3mm) |
|
Low cost and high stability |
|
CE
EMC certification |
|
|
|
-------------------------------------------------------------------------- |
|
POTENTIOMETER
TRANSMITTER (mini-size) |
Model:TWK
|
|
|
|
Accuracy ±0.025%F.S. |
|
Wide input ranges from 300Ω to 50KΩ |
|
Field-rangeable supper voltage from 10 to
28V |
|
Dimension mini-size(51.5x22.2x19.3mm) |
|
Low cost and high stability |
|
CE
EMC certification |
|
|
|
-------------------------------------------------------------------------- |
|
HEAD-MOUNTED TWO-WIRE POTENTIONMETER TRANSMITTER
|
Model:TWP
|
|
|
|
Accuracy 0.1%F.S. |
|
Wide input ranges from 100Ω to 50KΩ(3-wire) |
|
Burnout protection function, upscale the outpu
current limit of approximately≦20.32mA |
|
Field-rangeable supper voltage from 10 to
30V |
|
RL(max.)=(Vsupply-9V)/20mA,up to 750Ω
at 24VDCLow cost and high stability |
|
CE
EMC certification |
|
|
|
--------------------------------------------------------------------------
|
|
HEAD-MOUNTED
TWO-WIRE TEMPERATURE TRANSMITTER
|
Model:TW
|
|
|
|
Accuracy 0.1%F.S.(Pt-100),0.2%F.S.±0.5°C(CJC)(TC) |
|
Input range(-1999~9999)/Display unit(°C,°F)canbemodify |
|
Burnout protection function, upscale the outpu
current limit of approximately≦20.32mA |
|
Field-rangeable supper voltage from 10 to
30V |
|
RL(max.)=(Vsupply-9V)/20mA,up to 750Ω
at 24VDCLow cost and high stability |
|
CE
EMC certification |
|
|
|
|
|
ONE-CHANNEL DC SIGNAL ISOLATED MULTI-OUTPUT TRANSMITTER |
Model:DTM |
|
|
Accuracy 0.1% F.S. |
|
One-channel input dc signal isolated multi-output for design |
|
Wide selection of input/output range |
|
Dielectric strength 2KVac/1min(input/output1/output2/ output3 /output4/power) |
|
Wide input range for auxiliary power |
|
|
|
|
|
----------------------------------------------------------------------- |
|
TWO-CHANNEL DC SIGNAL ISOLATED DUAL OUTPUT TRANSMITTER |
Model:DDT |
|
|
Accuracy 0.1% F.S. |
|
Two channel input signal isolated dual output for design |
|
Wide selection of input/output range |
|
Dielectric strength 2KVac/1min.(input1/input2/output1/ output2/power) |
|
Wide input range for auxiliary power |
|
|
|
|
|
----------------------------------------------------------------------- |
|
MULTI-CHANNEL DC SIGNAL ISOLATED OUTPUT TRANSMITTER |
Model:MTD |
|
|
Accuracy 0.1% F.S. |
|
Multi-channel input dc signal isolated output for design |
|
Wide selection of input/output range |
|
Dielectric strength 2KVac/1min.(input/output/power) |
|
Wide input range for auxiliary power |
|
|
|
|
|
----------------------------------------------------------------------- |
|
|
--------------------------------------------------------------------------
|
DC
SIGNAL ISOLATED TRANSMITTER |
Model:TD |
|
|
|
Accuracy
0.1% F.S. |
|
Wide
selsction of input/output range |
|
Dielectric
strength 2KVac/1min(input/output) |
|
Wide
input range for auxiliary power |
|
Dimension
small and High stability |
|
CE
EMC certification |
|
|
|