5 DIGIT MICROPROCESS COUNTER,(Low
Power)(24x48mm) |
Model:MC24
|
|
| |
|
|
 |
Accepts input rates up to 10KHz |
|
|
Four counting modes Up,Down,Up/Down, quadrature
can be modified |
|
|
Quadrature sensing up to 4 times resolution |
|
|
Input scaling multiplied 0.0001 to 9.9999
can be modified |
|
|
Dimension small (24x48x48.5mm) and High stability |
|
Discrete
terminal,connector easy |
|
CE
EMC certification |
|
|
|
| -------------------------------------------------------------------------- |
| |
5
DIGIT MICROPROCESS COUNTER(24x48mm) |
Model:MCS
|
|
| |
|
|
|
|
Accepts input rates up to 10KHz |
|
|
Four counting modes Up,Down,Up/Down, quadrature
can be modified |
|
|
Quadrature sensing up to 4 times resolution |
|
|
Input scaling multiplied 0.00001 to 9.99999
can be modified |
|
|
Count inhibit function(GATE control) |
|
Three
alarm function(optional) |
|
15
bit DAC analog output function(optional) |
|
Digit
RS-485 interface function(optional) |
|
|
|
| -------------------------------------------------------------------------- |
| |
| |
| |
5
DIGIT HIGH SPEED MICROPROCESS COUNTER
(48x48mm)
|
Model:MC48 |
|
|
|
 |
Accepts input rates up to 50KHz |
|
Accept input rates 50 or 50000 CPS can modified |
|
Seven counting modes Front/after edge-up,Front/after edge-down,up/down,direct-up/down,
quadrature-up/down can be modified |
|
Quadrature sensing up to 4 times resolution |
|
Input scaling multiplied 0.0001 to 9.9999 can be modified |
|
Seven output mode N/F/R/Q/C/P/K can be modified |
|
Two alarm function (optional) |
|
16 bit DAC analog output function (optional) |
|
Digit RS-485 interface function (optional) |
|
Protection class NEMA4/IP65 |
|
| |
|
--------------------------------------------------------------------------------- |
| |
| |
6
MICROPROCESS COUNTER,(48x96mm) |
Model:MC |
|
|
|
| |
Accepts
input rates up to 10KHz |
| |
Accepts
input rates 50 or 10000 CPS can be modified |
| |
Four
counting modes Up,Down ,quadrature can be
modified |
| |
Quadrature
sensing up to 4 times resolution |
| |
Input
scaling multiplied 0.00001 to 9.99999 can
be modified |
| |
Count
inhibit function (GATE control) |
| |
Two
alarm function (optional) |
| |
15
bit DAC analog output function (optional) |
| |
Digit
RS-485 interface function (optional) |
|
CE
EMC certification |
|
|
|
--------------------------------------------------------------------------
|
| |
4/6 DIGIT MICROPROCESS COUNTER
(PUSHWHEEL TYPE)(48x96mm)
|
Model:MCP |
|
|
|
Accepts input rates up to 10KHz |
|
Accept input rates 50 or 10000 CPS can modified |
|
Four counting modes Up,Down,Up/Down,quadrature-up/down can be modified |
|
Quadrature sensing up to 4 times resolution |
|
Input scaling multiplied 0.00001 to 9.99999 can be modified |
|
Two alarm function (optional) |
|
16 bit DAC analog output function (optional) |
|
Digit RS-485 interface function(optional)
|
|
|
| |
-------------------------------------------------------------------------- |
| |
6
DIGIT HIGH SPEED MICROPROCESS COUNTER
(48x96x85mm)
|
Model:MCH |
|
|
|
Accepts
input rates up to 50KHz |
|
Accept
input rates 50 or 500 or 50000 CPS can be
modified |
|
Seven
counting modes Front/after edge-up,Front/after
edge-down,up/down,direct-up/down,quadrature-up/down
can be modified |
|
Quadrature
sensing up to 4 times resolution |
|
Input
scaling multiplied 0.00001 to 9.99999 can
be modified |
|
Seven
output mode N/F/R/Q/C/P/K can be modified |
|
Two
alarm function(optional) |
|
16
bit DAC analog output function (optional) |
|
Digit
RS-485 interface function (optional) |
|
|
| |
-------------------------------------------------------------------------- |
| |
ULTRA HIGH SPEED MICROPROCESS LENGTH,
ANGLE CONTROLLER COUNTER
(48x96x85mm)
|
Model:MCHH |
|
|
|
Accepts input rates up to 500KHz |
|
Readout range form -999999 to 999999 digit |
|
Normal counting and rotate for 360 degree counting can be modified |
|
Quadrature sensing up to 4 times resolution |
|
Input scaling multiplied 0.00001 to 9.99999 can be modified |
|
Two
alarm function(optional) |
|
16
bit DAC analog output function (optional) |
|
Digit
RS-485 interface function (optional) |
|
|
| |
-------------------------------------------------------------------------- |
| |
|
|
6
DIGIT MICROPROCESS COUNTER,(72x72mm)
|
Model:MC726 |
|
|
|
| |
Accepts
input rates up to 10KHz |
| |
Accept
input rates 50 or 10000 CPS can be modified |
| |
Four
counting modes Up,Down,quadrature can be modified
|
| |
Quadrature
sensing up to 4 times resolution |
| |
Input
scaling multiplied 0.00001 to 9.99999 can
be modified |
| |
Two
alarm function (optional) |
| |
Simulation
pushwheel digit switches, easy to operate |
| |
Count
inhibit function (GATE control) |
|
CE
EMC certification |
|
| |
|
|
|
--------------------------------------------------------------------------
|
|
6
DIGIT AUTOMATION ORIENT CONTROLLER COUNTER,(72x72mm)
|
Model:MC0726 |
|
|
|
| |
Readout
range from -199999 to 999999 |
| |
Accepts
input rates up to 5KHz |
| |
Quadrature
sensing up to 4 times resolution |
| |
Input
scaling multiplied 0.00001 to 9.99999 can
be modified |
| |
Orient
counter value can be modified |
| |
Compare
hysteresis can be modified |
| |
Three
relay output function (A>B,A=B,A<B) |
| |
Simulation
pushwheel digit switches, easy to operate |
|
CE
EMC certification |
|
| |
|
|
|
--------------------------------------------------------------------------
|
|
4
DIGITAL (ONE ALARM) & 6 DIGITAL TOTALIZER
COUNTER (72x72mm)
|
Model:MCT726 |
|
|
|
| |
Accepts
input rates up to 10KHz |
| |
Readout
range from 0 to 9999(one-alarm),0 to 999999
totalizer |
| |
Accepts
input rates 50 or 10000 CPS can be modified
|
| |
Input
scaling multiplied 0.001 to 9.9999 can be
modified |
| |
Simulation
pushwheel digit switches, easy to operate |
| |
Count
inhibit function (GATE controll) |
| |
One
alarm function for totalizer (optional) |
|
CE
EMC certification |
|
| |
|
|
|
--------------------------------------------------------------------------
|
|
5
DIGIT MICROPROCESS COUNTER (Display0.8")(48x96mm)
|
Model:MMX-C |
|
|
|
| |
Accepts
input rates up to 10KHz |
| |
Accepts
input rates 50 or 10000 CPS can be modified |
| |
Four
counting modes Up,Down ,quadrature can be
modified |
| |
Quadrature
sensing up to 4 times resolution |
| |
Input
scaling multiplied 0.00001 to 9.99999 can
be modified |
| |
One
alarm function (optional) |
| |
Dimension
small and High stability |
|
CE
EMC certification |
|
|
| |
|
|
|
|
