Batch controller ,Load cell transmitter(mini-size),Controller meter,DC MULTI-POWER METER (Smart 485/Low Power),Pressure transmitter,Digital panel meter,Microprocess Transmitter,Counter,Flow meter,Power meter,Transmitter,Slim-type-transmitter,Power Transducer

TEMPERATURE & HUMIDITY SIGNAL TRANSMITTER & CONTROLLER METER RELAY

Model:THM

	Accuracy±0.15%℃(Temperature),±1%RH(Humidity)
	Measuring -40~+120℃(Temperature),0~100%RH(Humidity)
	Response time within 20 second (0~90% at 1M/s air flow)
	Two 12bit DAC analog output function (option)
	Two alarm controller function (option)
	Digit RS-485 interface function (option)
	Protection class NEMA 4/IP65

-----------------------------------------------------------------------

6 DIGIT TIME COUNTER CONTROLLER,24x48mm

Model:MT24

	Timing start mode(Power on or external contact or NPN or DC4~30V pulse signal input can be modified
	4 type timer counting for (9999.99Hour/ 9999Hour59Minute/99Hour59Minute59Secon/ 9999Day23Hour) can be modified)
	Timer eleven output mode(A/A1/A2/A3/A5/B/B1/B2/C/D/E can be modified)
	One alarm output function
	Dimension small and High stability
	CE EMC certification

-----------------------------------------------------------------------

TEMPERATURE & HUMIDITY SIGNAL TRANSMITTER

Model:STH-1

	Accuracy±0.15℃(Temperature),±1%RH(Humidity)
	Measuring -40~+80℃(Temperature),0~100%RH(Humidity)
	Response time within 20 second (0~90% at 1.0M/s air flow)
	Field-rangeable supply voltage from DC10 to 28V
	Two 12 Bit DAC analog output function (option)
	Digit RS-485 interface function (option)
	Double waterproof treatment
	Protection class NEMA 4/IP65

-----------------------------------------------------------------------

TEMPERATURE & HUMIDITY SIGNAL TRANSMITTER (SUS 304 PROB)

Model:STH-2

	Accuracy±0.15℃(Temperature),±1%RH(Humidity)
	Measuring -40~+80℃(Temperature),0~100%RH(Humidity)
	Response time within 20 second (0~90% at 1.0M/s air flow)
	Field-rangeable supply voltage from DC10 to 28V
	Suitable for corrosion resistant(acidic and alkaline environments)
	Two 12 DAC analog output function (option)
	Digit RS-485 interface function (option)
	Double waterproof treatment
	Protection class NEMA 4/IP65

-----------------------------------------------------------------------

SPECIAL WATT-HOUR METER FOR SEPARATE BILLING OF ELECTRIC VEHICLE CHARGING PILES,24X48mm

Model:MMS-PWH

	Accuracy ±0.2% F.S.
	Measuring and display ACV/ACA/KW/KWH/Power Factor
	ACV/ACA/KW for Ture RMS
	Surage test 4KV(1.2x50us,)
	Digit RS-485 interface function
	Dimension small(24x48x48.5mm) and High stability
	Discrete terminal,connector easy

-----------------------------------------------------------------------

SLIM TYPE SPECICAL FUNCTION ISOLATED TRANSMITTER
& CONTROLLER METER RELAY

Model:SSFTR

	Accuracy 0.05% F.S. ±1digit
	Measuring DCA/DCV/ACA/ACV/Potentiometer /Transmitter/Pt-100/Resistor/etc....
	Programmable rate -19999~99999 digit
	Specical function Ramp buffer/Delay buffer/Maximum hold/minimun hold/Hold/Track
	Two relay output function (optional)
	16 bit DAC analog output function (optional)
	Digit RS-485 interface function (optional)
	Wide input range for auxiliary power

-----------------------------------------------------------------------

MICROPROCESS AC CURRENT/

AC VOLTAGE CALIBRATOR METER(48x96mm)

Model:MAG

	Accuracy ±0.1% F.S.
	Calibrator for AC current(AC0~5.000A)/AC voltage(AC0~99.99V/600.0V)
	AC output frequency 45.0 to 65.0Hz adjustable function
	Digit RS-485 interface function(optional)
	Dimension small and High stability

-----------------------------------------------------------------------

MICROPROCESS 6 CHANNEL INPUT ISOLATD

CONTROLLER METER(48x96mm)

Model:MM8I

	Accuracy 0.1% F.S. ±1 digit
	Measuring DCA/DCV/ACA/ACV/Thermocouple/etc...
	Programmable rate -1999~9999 digit
	Input channel number(1~6) can be modified
	Two alarm function(optional)
	Digit RS-485 interface function(optional)

-----------------------------------------------------------------------

SLIM TYPE MULTI-FUNCTION RS-485

CONTROLLER METER RELAY

Model:SMRSR

	Analog output accuracy±0.05% F.S.
	Readout range from -19999~99999 digit
	Calibrator analog output for DC4~20.000mA/0~20.000mA/0~10.000V)
	Modbus RTU mode for RS-485 protocal
	Two relay output function (optional)
	16 bit DAC analog output function (optional)
	Dimension small & High stability

-----------------------------------------------------------------------

6 DIGITAL MICROPROCESS PANEL METER(48x96mm)

Model:MM6

	Accuracy 0.015% F.S. ± 3digit
	Measuring DCA/DCV/ACA/ACV/Potentiometer/ Transmitter/Load Cell...
	Programmable rate -999999~999999 digit
	Auto zero and maximum hold function
	Decimal point can be modified
	Digit RS-485 interface function (optional)

-----------------------------------------------------------------------

MICROPROCESS DUAL INPUT (MATH FUNCTION)RPM & LINE-SPEED CONTROLLER METER(48x96mm)

Model:MMRD-M

	Accuracy 0.03% F.S.
	Dual input measuring and display Pulse(TTL,CMOS),Magnetic pick-up signal
	Accepts input rates up to 25KHz
	Display type of RPM or line-speed can be modified
	Input pulse of revolution can be modified(1~99999 pulse/revolution
	Four independent alarm function(optional)
	16 bit DAC analog output function(optional)
	Digit RS-485 interface function(optional)

-----------------------------------------------------------------------

MICROPROCESS DUAL INPUT RPM & LINE-SPEED CONTROLLER METER(48x96mm)

Model:MMRD

	Accuracy 0.03% F.S.
	Dual input measuring and display Pulse(TTL,CMOS),Magnetic pick-up signal
	Accepts input rates up to 25KHz
	Display type of RPM or line-speed can be modified
	Input pulse of revolution can be modified(1~99999 pulse/revolution
	Two independent alarm function(optional)
	16 bit DAC analog output function(optional)
	Digit RS-485 interface function(optional)

-----------------------------------------------------------------------

5 DIGIT MICROPROCESS DUAL COUNTER(MATH FUNCTION) LENGTH & FLOW CONTROLLER METER(48x96mm)

Model:MMCD-M

	Accepts input rates up to 10KHz
	Dual input measuring and display sensor signal
	Three counting modes up/down,direct-up/down,quadrature-up/down can be modified
	Quadrature sensing up to 4 times resolution
	Input scaling multiplied 0.0001 to 9.9999 can be modified
	Four independent alarm function(optional)
	16 bit DAC analog output function(optional)
	Digit RS-485 interface function(optional)

-----------------------------------------------------------------------

5 DIGIT MICROPROCESS DUAL COUNTER LENGTH & FLOW CONTROLLER METER(48x96mm)

Model:MMCD

	Accepts input rates up to 10KHz
	Dual input measuring and display sensor signal
	Three counting modes up/down,direct-up/down,quadrature-up/down can be modified
	Quadrature sensing up to 4 times resolution
	Input scaling multiplied 0.0001 to 9.9999 can be modified
	Two independent alarm function(optional)
	16 bit DAC analog output function(optional)
	Digit RS-485 interface function(optional)

-----------------------------------------------------------------------

4~20mA LOOP-POWERED,5 DIGIT LEDs DISPLAY PROCESS MONITORSwith built-in RS-485 (24x48mm)

Model:MA24-LD

	Accuracy 0.05% F.S. ±1 digit
	Programmable rate -19999 to 99999 digit
	Self-power,no external supply required
	Digit RS-485 interface function (optional)
	Dimension small(24x48x48.5mm) and High stability
	Discrete terminal,connector easy
	CE EMC certification

-----------------------------------------------------------------------

MULTI-FUNCTION TWO-WAY DC METER(48x96mm)

Model:MM2D-DTT

	Accuracy 0.03% F.S.±1digit
	Measuring and display DCV/DCA/W/KW/WH/KWH
	Programmable rate -19999 to 99999 digit(rate),-1999999999 to 9999999999 digit(totalizer)
	Four alarm function (optional)
	16 bit DAC analog output function (optional)
	Digit RS-485 interface function)(optional)

-----------------------------------------------------------------------

MICROPROCESS RPM & LINE-SPEED METER(SELF-POWER)(24x48mm) (PULSE INPUT)

Model:MR24S

	Accuracy 0.03% F.S.
	Accepts input rates up to 1KHz
	Display type of RPM or line-speed can be modified
	Display unit M/min,Y/min,ft/min can be modified
	Input pulse of revolution can be modified(1~99999)
	Dimension small(24x48x48.5mm) and High stability
	Discrete terminal,connector easy
	CE EMC certification

-----------------------------------------------------------------------

MICROPROCESS RATE & TOTALIZER METER

(SELF-POWER),24X48mm(PULSE INPUT)

(24x48mm)

Model:MFRTS

	Self-power,measuring pulse input ,display rate and totalizer
	Programmable rate 0 to 99999 digit(rate),0 to 99999999 digit(totalizer)
	Accuracy 0.05% F.S.(rate)
	Input range form 0.01Hz to 1KHz
	Programmable time base 1 or 60 or 3600 second
	Dimension small(24x48x48.5mm) and High stability
	Discrete terminal,connector easy
	CE EMC certification

-----------------------------------------------------------------------

SLIM TYPE TWO CHANNEL MICROPROCESS ANALOG

SIGNAL INPUT MODULE

Model:SDMAI

	Accuracy 0.05% F.S. ±1digit
	Measuring DCA/DCV/ACA/ACV/Potentiometer/ Transmitter/Pt-100/Thermocouple/Load Cell/Resistor/etc...
	Programmable rate -19999~99999 digit
	Two channel input signal isolated output RS-485 for design
	Dielectric strength 1.5KVac/1min(input1/input2/output RS-485/power)
	Wide input range for auxiliary power
	Dimension small & High stability

-----------------------------------------------------------------------

SLIM TYPE TWO CHANNEL MICROPROCESS ANALOG

SIGNAL ISOLATED TRANSMITTER

Model:SDMAT

	Accuracy 0.05% F.S. ±1digit
	Measuring DCA/DCV/ACA/ACV/Potentiometer/ Transmitter/Pt-100/Thermocouple/Load Cell/Resistor/etc...
	Programmable rate -19999~99999 digit
	Two channel input signal isolated output for design
	Dielectric strength 1.5KVac/1min (input1/input2/output1/output2/power)
	Wide input range for auxiliary power
	Dimension small & High stability

-----------------------------------------------------------------------

HEAD-MOUNTED TWO WIRE TEMPERATURE

SIGNAL ISOLATED TRANSMITTER

Model:TW-I

	Accuracy 0.1% F.S.(Pt-100),0.2% F.S.0.5℃(CJC)(TC)
	Input type (Pt-100/J/K/T/E/R/S/B) can be modified
	Output range(-19999~99999)/Display unit(℃,℉)can be modified
	Burnout protection function, upscale the output current limit of approximately≦21mA
	Field-rangeable supper voltage from 12 to 28V
	Output DC4~20mA,RL(max.)=(Vsupper-12V)/20mA, up to 600 ohms at 24VDC
	Dielectric strength 1.5KVac/1min (input/output)

HM-1

-----------------------------------------------------------------------

ULTRA SLIM TYPE TWO-WIRE ANALOG SIGNAL

ISOLATED TRANSMITTER

Model:SSMA-T

	Accuracy 0.1% F.S.(DC/Pt-100),0.2% F.S.0.5℃(CJC)(TC)
	Input analog type (DCV/mV/mA/Pt-100/J/K/T/E/R/S/B) can be modified
	Burnout protection function, upscale the output current limit of approximately≦21mA
	Field-rangeable two-wire supply voltage from 12 to 28V
	Output DC4~20mA,RL(max.)=(Vsupply-12V)/20mA, up to 600 ohms at 24VDC
	Dielectric strength 1.5KVac/1min(input/output)

HM-1

-----------------------------------------------------------------------

SLIM TYPE TWO CHANNEL ANALOG SIGNAL

ISOLATED TRANSMITTER

Model:SDAT

	Accuracy 0.1% F.S. ±1digit
	Measuring DCA/DCV/ACA/ACV/Potentiometer /Transmitter/Pt-100/Load Cell/ Resistor/etc...
	Two channel input signal isolat ed output fordesign
	Dielectric strength 1.5KVac/1min(input1/input2/ output1/output2/power)
	Wide input range for auxiliary power
	Dimension small & High stability

-----------------------------------------------------------------------

SLIM TYPE TWO-WIRE ANALOG SIGNAL

ISOLATED TRANSMITTER

Model:SMA-T

	Accuracy 0.1% F.S.(DC/Pt-100),0.2% F.S.0.5℃(CJC)(TC)
	Input analog type (DCV/mV/mA/Pt-100/J/K/T/E/R/S/B) can be modified
	Burnout protection function, upscale the output current limit of approximately≦21mA
	Field-rangeable two-wire supper voltage from 12 to 28V
	Output DC4~20mA,RL(max.)=(Vsupper-12V)/20mA, up to 600 ohms at 24VDC
	Dielectric strength 1.5KVac/1min(input/output)

-----------------------------------------------------------------------

SLIM TYPE TWO-WIRE DC SIGNAL

ISOLATED TRANSMITTER

Model:STD-T

	Accuracy 0.1% F.S.
	Wide selsction of input range
	Output DC4~20mA,RL(max.)=(Vsupply-12V/20mA,up to 600 ohm at 24VDC)
	Field-rangeable supper voltage from 12 to 28V
	Dielectric strength 1.5KVac/1min(input/output)
	Dimension small & High stability

-----------------------------------------------------------------------

THREE WIRE DC SIGNAL ISOLATED

TRANSMITTER (mini-size)

Model:TWD

	Accuracy 0.1% F.S.
	Dielectric strength 1KVac/1min (input/output)
	Field-rangeable supper voltage from 10 to 28V
	Dimension mini-size(51.5x22.2x19.3mm)
	Low cost and high stability
	CE EMC certification

-----------------------------------------------------------------------

MULTI-FUNCTION POWER METER ,(96x96mm)

Model:MMP-2H

	Accuracy ±0.1% F.S.
	Measuring and display ACV/ACA/Watt/Var/VA/Power Factor/Frequency/KWH/ DM(Demand)
	Input measurement network can beselectives (1P2W/1P3W/3P3W/3P4W)
	Measuring ACV/ACA total harmonic distortion(THD), up to 35th harmonic(optional)
	Two alarm control function (optional)
	Two pulse output function (optional)
	Digit RS-485 interface function (Optional)

-----------------------------------------------------------------------

MICROPROCESS PANEL CONTROLLER METER (DISPLAY 0.8")(48x96x85mm)

Model:MM3S

	Accuracy 0.05% F.S.±1digit
	MeasuringDCA/DCV/ACA/ACV/Potentiometer/ Transmitter/Pt-100/Thermocouple/Load Cell/ Resistor/etc...
	Programmable rate -19999~99999 digit
	Auto zero and math-rootextractor and maximum hold function
	Correction for non-linearity function (16 segments)(optional)
	Max. four alarm function(optional)
	16 bit DAC analog output function(optional)
	Digit RS-485 interface function(optional)

-----------------------------------------------------------------------

DC MULTI-POWER METER

(Smart 485/Low Power)(48x96mm)

Model:MMX-D

	Accuracy 0.05% F.S.±1digit
	Measuring and display DCV/DCA/W(KW)/WH(KWH)
	Auto range(DC0~99.99V/0~600.0V)for voltage input function
	Programmable rate 0 to 9999 digit(DCA/W(KW),0 to 99999999 digit(WH(KWH))
	Digit RS-485 interface function(optional)

-----------------------------------------------------------------------

6 DIGIT MULTI-FUNCTION MICROPROCESS COUNTER/TIMER COUNTER(72x72mm)

Model:MM726

	Counter and timer function can be selective
	Pulse input type NPN/PNP can be modified
	Accept input rates 50 or 50000 CPS can modified-(Counter)
	Five counting modes Front/after edge-up,down,up/down,direct-up/down, quadrature-up/down can be modified
	Counter ten output mode N/F/R/Q/C/P/K /A/L/H can be modified
	Twelve time counting range form 999.999 second to 999999 hour can be modified
	Timer eleven output mode A/A1/A2/A3/B/B1/B2/C/D/E/F can be modified
	Protection class NEMA4/IP67

-----------------------------------------------------------------------

6 DIGIT MULTI-FUNCTION MICROPROCESS COUNTER/TIME(48x48mm)

Model:MM48

	Auto.change red or green or orange display when alarm status changes
	Counter and time function can be selective
	Accept input rates 50 or 10000 CPS can be modified
	Five counting input modes Front/ after edge-up,Front/after edge-down,up/ down,direct-up/down,quadrature-up/ down can be modified
	Ten output mode N/F/R/Q/C/P/K/A/L/H can be modified
	Twelve time counting range form 999.999 second to 999999 hour can be modified-(Time)
	Time eleven output mode A/A1/A2/A3/B/B1/B2/C/D/E/F can be modified
	Two alarm function

-----------------------------------------------------------------------

6 DIGIT MULTI-FUNCTION MICROPROCESS TIME(48x48mm)

Model:MT48

	Auto.change red or green or orange display when alarm status changes
	Pulse input type NPN/PNP can be modified
	Pulse input signal time 1ms/20ms can be modified
	Time counting direction Up/Down can be modified
	Twelve time counting range form 999.999 second to 999999 hour can be modified-(Time)
	Time twelve output mode A/A1/A2/A3/A5/B/B1/B2/C/D/E/F can be modified
	Two alarm function

-----------------------------------------------------------------------

6 DIGITAL ONE/TWO ALARM & 6 DIGITAL TOTALIZER COUNTER(72x72mm)

Model:MT726

	NPN/PNP count input type can be modified
	Accepts input rates up to 50KHz
	Readout range form -199999 to 999999 digit
	Accept input rates 50 or 50000 CPS can modified
	Input scaling multiplied 0.00001 to 9.99999 can be modified
	Totalizer counting modes cnn be modified (synchronize and un-synchronize)
	Pre-warn alarm function (two alarm output) can be modified
	Three alarm function (optional)
	16 bit DAC analog output function (optional)
	Digit RS-485 interface function (optional)
	Protection class NEMA4/IP67

-----------------------------------------------------------------------

MULTI-FUNCTION MICROPROCESS RPM & LINE-SPEED CONTROLLER METER(72x72mm)

Model:MR726

	NPN/PNP count input type can be modified
	Accuracy 0.03% F.S.
	Measuring Pulse(TTL,CMOS),Magnetic pick-up signal
	Accepts input rates up to 200KHz
	Accept input rates 50 or 200000 CPS can modified
	Dual input math function B-A,B/A,(B/A-1),1-(B/A),B/(A+B)
	Display type of RPM or line-speed can be modified
	Input pulse of revolution can be modified(1~99999 pulse/revolution
	Four alarm function (optional)
	16 bit DAC analog output function (optional)
	Digit RS-485 interface function (optional)
	Protection class NEMA4/IP67

-----------------------------------------------------------------------

HIGH SPEED MICROPROCESS LENGTH,FLOWCONTROLLER METER(72x72mm)

Model:MMC726

	NPN/PNP count input type can be modified
	Readout range form -19999 to 99999 digit
	Accepts input rates up to 50KHz
	Accept input rates 50 or 50000 CPS can modified
	Five counting modes Front/after edge-up,down,up/down,direct-up/down,quadrature-up/down can be modified
	Quadrature sensing up to 4 times resolution
	Input scaling multiplied 0.0001 to 9.9999 can be modified
	Four alarm function (optional)
	16 bit DAC analog output function (optional)
	Digit RS-485 interface function (optional)
	Protection class NEMA4/IP67

-----------------------------------------------------------------------

MICROPROCESS PANEL CONTROLLER METER (72x72mm)

Model:MA726

	Accuracy 0.05% F.S. ±1digit
	Measuring DCA/DCV/ACA/ACV/Potentiometer/ Pt-100/Transmitter/Load Cell/Resistor/etc...
	Programmable rate -19999~99999 digit
	Auto zero and hold and maximum hold function
	Four alarm function (optional)
	16 bit DAC analog output function (optional)
	Digit RS-485 interface function (optional)
	Protection class NEMA4/IP67

-----------------------------------------------------------------------

MICROPROCESS AC CURRENT MONITOR METER(72x72mm)

Model:MCM726

	Accuracy 0.15% F.S.±1 digit
	Input measurement network can be selective(1P2W,3P3W)
	Start delay and alarm delay function(0 to99.9 second)
	Monitoring current alarm latch function
	Two independent reset key can unite alarm latch function
	Two alarm function
	Digit RS-485 interface function(optional)
	Protection class NEMA4/IP67

-----------------------------------------------------------------------

4/6 DIGIT MICROPROCESS COUNTER

(PUSHWHEEL TYPE)(48x96mm)

Model:MCP

	Accepts input rates up to 10KHz
	Four counting modes Up,Down,Up/Down,quadrature-up/down can be modified
	Quadrature sensing up to 4 times resolution
	Input scaling multiplied 0.00001 to 9.99999 can be modified
	Two alarm function (optional)
	16 bit DAC analog output function (optional)
	Digit RS-485 interface function(optional)

-----------------------------------------------------------------------

MICROPROCESS PANEL CONTROLLER METER

(48x48mm)

Model:MA48

	Accuracy 0.05% F.S. ±1digit
	Measuring DCA/DCV/ACA/ACV/Potentiometer/ Pt-100/Transmitter/Load Cell/Resistor/etc...
	Programmable rate -19999~99999 digit
	Auto zero and hold and maximum hold function
	Two alarm function (optional)
	16 bit DAC analog output function (optional)
	Digit RS-485 interface function (optional)
	Protection class NEMA4/IP65

-----------------------------------------------------------------------

5 DIGIT HIGH SPEED MICROPROCESS COUNTER

(48x48mm)

Model:MC48

	Accepts input rates up to 50KHz
	Accept input rates 50 or 50000 CPS can modified
	Seven counting modes Front/after edge-up,Front/after edge-down,up/down,direct-up/down, quadrature-up/down can be modified
	Quadrature sensing up to 4 times resolution
	Input scaling multiplied 0.0001 to 9.9999 can be modified
	Seven output mode N/F/R/Q/C/P/K can be modified
	Two alarm function (optional)
	16 bit DAC analog output function (optional)
	Digit RS-485 interface function (optional)
	Protection class NEMA4/IP65

-----------------------------------------------------------------------

MULTI-FUNCTION MICROPROCESS RPM & LINE-SPEED
CONTROLLER METER(48x48mm)

Model:MR48

	Accuracy 0.03% F.S.
	Accepts input rates up to 50KHz
	Accept input rates 50 or 50000 CPS can modified
	Dual input math function B-A,B/A,(B/A-1),1-(B/A),B/(A+B)
	Display type of RPM or line-speed can be modified
	Input pulse of revolution can be modified(1~99999 pulse/revolution)
	Two alarm function (optional)
	16 bit DAC analog output function (optional)
	Digit RS-485 interface function (optional)
	Protection class NEMA4/IP65

-----------------------------------------------------------------------

HIGH SPEED MICROPROCESS LENGTH,FLOW CONTROLLER METER(48x48mm)

Model:MMC48

	Readout range form -19999 to 99999 digit
	Accepts input rates up to 50KHz
	Accept input rates 50 or 50000 CPS can modified
	Five counting modes Front/after edge-up,up/down,direct-up/down,quadrature-up/ down can be modified
	Quadrature sensing up to 4 times resolution
	Input scaling multiplied 0.0001 to 9.9999 can be modified
	Two alarm function (optional)
	16 bit DAC analog output function (optional)
	Digit RS-485 interface function (optional)
	Protection class NEMA4/IP65

-----------------------------------------------------------------------

MICROPROCESS RPM & LINE-SPEED CONTROLLER METER

(PUSHWHEEL TYPE)(48x96mm)

Model:MMRP

	Accuracy 0.03% F.S.
	Measuring Pulse(TTL,CMOS),Magnetic pick-up signal
	Accepts input rates up to 50KHz
	Dual input math function B-A,B/A,(B/A-1),1-(B/A),B/(A+B)
	Display type of RPM or line-speed can be modified
	Input pulse of revolution can be modified(1~99999 pulse/revolution)
	Two alarm function)(optional)
	16 bit DAC analog outpu function(optional)
	Digit RS-485 interface function(optional)

-----------------------------------------------------------------------

6 DIGITAL HIGH SPEED MICROPROCESS PANEL CONTROLLER METER (DISPLAY 0.56")(48x96mm)

Model:MMX-H

	Accuracy 0.01% F.S.±3digit
	Measuring DCA/DCV/Potentiometer/ Transmitter/Load Cell/Resistor/etc......
	Dual input math function(A,B,A+B,A-B, K-(A+B))
	Programmable rate -199999~999999 digit
	High speed sampling times 2000Hz
	Auto-tracing compensation for Zero-area value(<0.1%F.S.)
	Display auto zero/hold/reset function
	Max. four alarm function (optional)
	16 bit DAC analog output function (optional)
	Digit RS-485 interface function)(optional)

-----------------------------------------------------------------------

MULTI-FUNCTION RS-485 CONTROLLER METER

(24x48mm)

Model:MMX-RSMS

	Analog output accuracy ±0.05% F.S.
	Readout range from -19999~99999 digit
	Calibrator analog output for DC4~20.000mA/0~20.000mA/0~10.000V
	Modbus RTU mode for RS-485 protocal
	Two relay output function (optional)
	16 bit DAC analog output function (optional)
	Dimension small and High stability

-----------------------------------------------------------------------

MULTI-FUNCTION RS-485 CONTROLLER METER (DISPLAY 0.8")

(48x96x85mm)

Model:MMX-RSM

	Analog output accuracy ±0.05% F.S.
	Readout range from -19999~99999 digit
	Calibrator analog output for DC4~20.000mA/0~20.000mA/0~10.000V
	Modbus RTU mode for RS-485 protocal
	Four relay output function (optional)
	16 bit DAC analog output function (optional)
	Dimension small and High stability

-----------------------------------------------------------------------

MICROPROCESS PANEL CONTROLLER METER (DISPLAY 0.8")(48x96x85mm)

Model:MM3

	Accuracy 0.05% F.S.±1digit
	MeasuringDCA/DCV/ACA/ACV/Potentiometer/ Transmitter/Pt-100/Thermocouple/Load Cell/ Resistor/etc...
	Programmable rate -19999~99999 digit
	Auto zero and hold and maximum hold function
	Max. four alarm function(optional)
	16 bit DAC analog output function(optional)
	Digit RS-485 interface function(optional)

-----------------------------------------------------------------------

MICROPROCESS DUAL ANALOG INPUT

(MATH FUNCTION)PANEL CONTROLLER METER

(48x96mm)

Model:MM2D-D

	Accuracy 0.03% F.S.±1digit
	Dual input measuring and display DCA/DCV/Potentiometer/Transmitter /Pt-100/Thermocouple/Load Cell/etc......
	Dual input math function A+B/A-B/AxB/A/B
	Programmable rate -19999~ 99999 digit
	Four alarm function (optional)
	16 bit DAC analog output function (optional)
	Digit RS-485 interface function (optional)

-----------------------------------------------------------------------

MULTI-FUNCTION DC METER(48x96mm)

Model:MM2D-DT

	Accuracy 0.03% F.S.±1digit
	Measuring and display DCV/DCA/W/KW/WH/KWHÉ)
	Programmable rate 0 to 99999 digit(rate),0 to 9999999999 digit(totalizer)
	Four alarm function (optional)
	16 bit DAC analog output function (optional)
	Digit RS-485 interface function)(optional)

-----------------------------------------------------------------------

PULSE/ANALOG INPUT FLOW RATE/TOTALIZER CONTROLLER METER

Model:MAFRT

	Accuracy 0.05% F.S.±1digit
	Measuring and display rate(5 digits)/ batch(6 digits)/totalizer(10 digits)
	Display flow unit TON/M3/Liter/GAL/CC can be modified
	Programable time base(1 or 60 or 3600 or 86400) second
	Math-rootextractor function, rootextractor contain 0.5/1.5/2.5
	Synchronize totalizer of pulse output function
	Correction(16 segments) for non-linearity function(optional)
	Four alarm function (optional)
	16 bit DAC isolating analog output function(optional)
	Digit RS-485 interface function(optional)

16Lr

-----------------------------------------------------------------------

PULSE/ANALOG INPUT FLOW RATE/TOTALIZER/BATCH COTROLLER (two-stage)METER(48x96mm)

Model:MRT-B

16Lr

	Accuracy 0.05% F.S.±1digit
	Measuring and display rate(5 digits)/ batch(6 digits)/totalizer(10 digits)
	Display flow unit TON/M3/Liter/GAL/CC can be modified
	Programable time base(1 or 60 or 3600 or 86400) second
	Prestop counting function
	Two-counting mode Up/Down for batch controller
	Front panel push buttons allow the operator to start/stop/batch reset function
	Synchronize totalizer of pulse output function
	Protection class NEMA4/IP64

-----------------------------------------------------------------------

5 DIGIT MICROPROCESS COUNTER,(Low Power)

(24x48mm)

Model:MC24

	Accepts input rates up to 10KHz
	Four counting modes Up,Down,Up/Down, quadrature can be modified
	Quadrature sensing up to 4 times resolution
	Input scaling multiplied 0.0001 to 9.9999 can be modified
	Dimension small (24x48x48.5mm) and High stability
	Discrete terminal,connector easy
	CE EMC certification

-----------------------------------------------------------------------

ULTRA HIGH SPEED MICROPROCESS LENGTH,

ANGLE CONTROLLER COUNTER

(48x96x85mm)

Model:MCHH

	Accepts input rates up to 500KHz
	Readout range form -999999 to 999999 digit
	Normal counting and rotate for 360 degree counting can be modified
	Quadrature sensing up to 4 times resolution
	Input scaling multiplied 0.00001 to 9.99999 can be modified
	Two alarm function(optional)
	16 bit DAC analog output function (optional)
	Digit RS-485 interface function (optional)

-----------------------------------------------------------------------

6 DIGIT HIGH SPEED MICROPROCESS COUNTER

(48x96x85mm)

Model:MCH

	Accepts input rates up to 50KHz
	Accept input rates 50 or 500 or 50000 CPS can be modified
	Seven counting modes Front/after edge-up,Front/after edge-down,up/down,direct-up/down,quadrature-up/down can be modified
	Quadrature sensing up to 4 times resolution
	Input scaling multiplied 0.00001 to 9.99999 can be modified
	Seven output mode N/F/R/Q/C/P/K can be modified
	Two alarm function(optional)
	16 bit DAC analog output function (optional)
	Digit RS-485 interface function (optional)

-----------------------------------------------------------------------

MICROPROCESS RPM & LINE-SPEED METER

(Low Power)(24x48mm)

Model:MR24

	Accuracy 0.01% F.S.
	Accept input rates up to 50 KHz
	Display type of RPM or line-speed can be modified
	Display unit M/min,Y/min,ft/min can be modified
	Input pulse of revolution can be modified (1~99999)
	Dimension small (24x48x48.5mm) and High stability
	Discrete terminal,connector easy
	CE EMC certification

-----------------------------------------------------------------------

MULTI-FUNCTION MICROPROCESS RPM & LINE-SPEED CONTROLLER METER(PULSE INPUT") (48x96x85mm)

Model:MMRH

	Accuracy 0.03% F.S.
	Measuring Pulse(TTL,CMOS), Magnetic pick-up signal
	Accepts input rates up to 200KHz
	Accept input rates 50/500/200000 CPS can be modfied
	Dual input math function B-A,B/A,(B/A-1),1-(B/A),B/(A+B)
	Display type of RPM or line-speed can be modified
	nput pulse of revolution can be modified (1~99999pulse/revolution)
	Four alarm function(optional)
	16 bit DAC analog output function (optional)
	Digit RS-485 interface function (optional)

-----------------------------------------------------------------------

MICROPROCESS LENGTH,FLOW CONTROLLER METER

(24x48mm)

Model:MMCS

	Readout range from -19999 to 99999
	Accepts input rates up to 10KHz
	Four counting modes Up,Down,Up/Down, quadrature can be modified
	Quadrature sensing up to 4 times resolution
	Input scaling multiplied 0.0001 to 9.9999 can be modified
	Two alarm function(optional)
	15 bit DAC analog output function(optional)
	Digit RS-485 interface function(optional)

-----------------------------------------------------------------------

HIGH SPEED MICROPROCESS LENGTH,FLOW

CONTROLLER METER ) ( PULSE INPUT )

(48x96x85mm)

Model:MMCH

	Readout range from _19999 to 99999
	Accepts input rates up to 50KHz
	Accept input rates 50 or 500 or 50000 CPS can be modified
	Five counting modes front/after edge-Up,Up/Down,Direct-Up/Down Quadrature-Up/Down can be modified
	Quadrature sensing up to 4 times resolution
	Input scaling multiplied 0.0001 to 9.9999 can be modified
	Four alarm function (optional)
	16 bit DAC analog output function (optional)
	Digit RS-485 interface function (optional)

-----------------------------------------------------------------------

SIX-FUNCTION AC POWER METER,1P2W,

(24x48mm)

Model:MMS-P

	Accuracy 0.1% F.S.
	Measuring and display ACV/ACA/KW/Power factor/Frequency/KWH
	ACA/ACV/WATT for True RMS
	Surage test 4KV(1.2x50us)
	Dimension small (24x48x48.5mm) and High stability
	Discrete terminal,connector easy

-----------------------------------------------------------------------

MULTI-FUNCTION POWER METER )(1P2W)

(48x96mm)

Model:MMP-1

	Accuracy 0.1% F.S.
	Measuring and display ACV/ACA/W(KW)/ Power Factor/Frequency/WH(KWH)
	ACA/ACV/Watt for True RMS
	Surage test 4KV(1.2x50us)
	Four alarm control function (optional)
	Digit RS-485 interface function (optional)
	16 bit DAC analog output function (optional)

-----------------------------------------------------------------------

3 PHASE AC VOLTAGE/CURRENT METER

(96x96mm)

Model:MMP-VI

	Accuracy 0.15% F.S.
	Measuring ACV-line/ACV-phase/A
	Measuring ACV/ACA total harmonic distortion (THD),up to 31th harmonic
	CT rate/PT rate can be modified(1 to 9999)
	Surage test 4KV(1.2x50us)
	Four alarm control function (optional)
	Digit RS-485 interface function(Optional)

-----------------------------------------------------------------------

SLIMMED DOWN MODE MULTI-FUNCTION POWER METER (48x96mm)

Model:MMP-3S

	Analog output accuracy ±0.15% F.S.
	Measuring and display ACV/ACA/W(KW)/ Power Factor/Frequency/WH(KWH)
	ACA/ACV/WATT for TRMS)
	Input measurement network can be selectives(1P2W/1P3W/3P3W/3P4W)
	CT rate (1 to 9999)/ PT rate (1.0 to 999.9) can be modified
	Three alarm control function (optional)
	Digit RS-485 interface function (Optional)

-----------------------------------------------------------------------

HIGH DIELECTRIC STRENGTH DC SIGNAL ISOLATED TRANSMITTER

Model:TDH

	Accuracy 0.1% F.S.
	Wide selsction of input/output range
	Dielectric strength 5KVac/1min.(input/output/power)
	Surge isolation voltage,Vpeak =10KV(1.2x50us,input/output)
	Dimension small & High stability

-----------------------------------------------------------------------

PROGRAMMABLE PULSE SCALER ISOLATED

TRANSMITTER

Model: TFP

	Maximum input frequency 10KHz
	A variety of input and output selection
	Wide range of pulse input premultiplied (0.1 to 1.0) and the pre-addition (1-165000) Function
	Dielectric strength 2KVac/1 min.(input/output/power
	Wide input range for auxiliary power
	Dimension small & High stability

-----------------------------------------------------------------------

PROGRAMMABLE DC TO FREQUENCY ISOLATED TRANSMITTER

Model: TDF

	Accuracy 0.1%F.S.
	Maximum output frequency 100KHz
	Wide range of pulse output functions 0.006Hz to 100KHz
	Wide range of pulse input premultiplied (0.1 to 1.0) and the pre-addition (1-165000) Function
	Dielectric strength 2KVac/1 min.(input/output/power
	Wide input range for auxiliary power
	Dimension small & High stability

-----------------------------------------------------------------------

ULTRA SLIM TYPE TEMPERATURE ISOLATED TRANSMITTER(102x7.5x102mm)

Model:SSTMT

	Accuracy 0.1%F.S.(Pt-100),0.2%F.S.±0.5¢J(CJC)(TC)
	Input sensor type (Pt-100/J/K/T/E/R/S/B) and output range(-1999.9~9999.9¢J/¢K) can be modify for handly meter)
	Wide switchable select DC output ranges over 20 standard process signal
	Thermocouple input burnout protection function
	Dielectric strength 1.5KVac/1 min. (input/output)
	Wide input range for auxiliary power
	CE EMC certification

-----------------------------------------------------------------------

SLIM TYPE FREQUENCY ISOLATED TRANSMITTER & CONTROLLER METER RELAY

Model:SMFTR

	Accuracy 0.03% F.S.
	Accepts input frequency rate 50Hz or 50KHz can be modified
	Measuring Pulse(TTL,CMOS),Switch contact Magnetic pick-up signal
	Input range from 0.01Hz to 50KHz
	Max. two alarm function (optional)
	16 bit DAC analog output function (optional)
	Digit RS-485 interface function (optional)
	Wide input range for auxiliary power
	Dimension small & Higt stability

-----------------------------------------------------------------------

TEL:886-2-2276-3475 / FAX:886-2-2276-3479 / E-mail:axe168.mail@msa.hinet.net

E-mail:axe@axe168.com.tw

No.70,Lane 83, Hua Cheng Road, Xinzhuang Dist., New Taipei City 24252,Taiwan(R.O.C)


>	NEW PRODUCT
>	SENSOR
>	Digital meter
>	Controller meter
>	HIGH SPEED　Controller meter
>	Flow controller meter
>	Counter
>	Power meter
>	Transmitter
>	Slim type transmitter
>	Microprocess transmitter
>	Power transducer

>	Download Adobe Reader
>	Download ModBusTest

Sitemap Preset counter Digital panel meter Digital rpm meter